Home > Laboratories > Mobile Labs


Product Information

Pacific Environmental uses its 30+ years experience in clean room design and clean room construction to provide innovative solutions to your cleanroom requirements. Whether your needs are driven by mobility requirements, temporary applications, time or space constraints - we can provide you with a completely equipped and furnished cleanroom environment.

    Pacific Environmental Technologies, Inc’s mobile cleanrooms are:
  • Pre fabricated
  • Pre tested
  • Certified

A complete package!

    Pacific Environmental Technologies, Inc’s mobile cleanrooms can be provided in the following configurations:
  • Trailer type as in highway tractor-trailer
  • Transportable type as in mobile office or shipping container (moved via flatbed)
  • Motorized type as in motor home or van

These self contained, cleanroom enclosures are designed and built to meet various applications in the Biotech, Pharmaceutical, Semiconductor and even Military & Aerospace industries. They can be stand-alone enclosures containing their own mechanical system for basic comfort cooling or for precise temperature and humidity control, emergency power, lighting, water, ancillary support systems and a filtration system to meet the specified cleanliness levels, including HEPA or ULPA filtration for applications requiring a certified cleanroom environment. Constructed for high durability, they are rugged and weatherproof, capable of withstanding extreme outside conditions.

Their modular design allows for single unit operations or multi-unit configurations that can be interconnected. The versatile designs allow for convenient and rapid transport and installation just about anywhere.. Each mobile cleanroom trailer is designed and built to meet a specific application, so please contact Pacific Environmental Technologies, Inc. for additional information and go to our other tabs above for more information.

  • mobile lab
  • Above: 53 ft mobile laboratory rated at Class 1,000. This unit contains 3 internal exhaust benches, RODI water purification system, humidity control systems, mechanical systems, and segregated gowning space.

Mobile Laboratories - Primary Features:

Pacific Environmental Technologies utilizes standard components where possible to minimize cost and delivery times. This starts with the basic trailer.

    Standard trailers come in 5 lengths:*
    Click any of the dimensions below for dimensioned drawing.
  • 20 ft
  • 30 ft
  • 40 ft
  • 45 ft
  • 53 ft

    • * All trailers are 8ft 6in wide.

  • mobile lab
  • 28ft. Trailer Drawing, dimensioned.
    Click to enlarge.
  • mobile lab
  • 45ft. Trailer Drawing, dimensioned.
    Click to enlarge.
  • mobile lab
  • 53ft. Trailer Drawing, dimensioned.
    Click to enlarge.

Mobile Laboratories - Product Options:

Options vary based on design and structure used. For this reason, not all of the available options are displayed:

    Common Options:
  • Comfort Cooling (standard)
  • Temperature & Humidity control
  • Emergency & Backup power
  • RO-DI and Chilled water systems
  • HEPA or ULPA rated Fan-Filter Units

Have unique design requirements? Don't see an option listed here? Please feel free to Contact Us or Request a Quote to discuss any questions or concerns you may have.

Mobile Laboratories - Technical Data

    CLASS VERSUS HOURLY AIR CHANGE RATES (ACH)
  • CLASS 100,000 typically 25 to 35 air changes per hour.
  • CLASS 10,000 typically 45 to 60 air changes per hour.
  • CLASS 1,000 typically 75 to 120 air changes per hour.
  • CLASS 100 typically 250 to 350 air changes per hour.
  • CLASS 100,000 typically 400 to 600 air changes per hour.

FILTER CALCULATION BASED ON CLASS AND AIR CHANGE RATE
FILTERS REQUIRED = AREA X CEILING HEIGHT X ACH/ 650 CFM*

* Note average filter cfm output can vary between 600 cfm to 750 cfm depending on filter manufacturer and the external pressure drop the filter is subject to.


Mobile Laboratories - Primary Features:

Temporary, transportable cleanrooms and laboratories.

PETI's transportable laboratories are constructed using standard ISO containers and portable structures, making them resilient enough for longer term usage while still maintaining their ease of assembly, disassembly, and transportability. Able to be hauled on flatbed truck or shipped overseas anywhere in the world, PETI's transportable laboratories are the perfect application for companies seeking a portable, temporary solution.

    Standard sizes:
  • 12 ft
  • 20 ft
  • 23 ft
  • 30 ft
  • 35 ft
  • 45 ft
  • 53 ft

  • mobile lab mobile lab
  • Above: Expanded mobile laboratory and finished interior.

Mobile Laboratories - Product Options:

Mobile Laboratories - Technical Data:

    CLASS VERSUS HOURLY AIR CHANGE RATES (ACH)
  • CLASS 100,000 typically 25 to 35 air changes per hour.
  • CLASS 10,000 typically 45 to 60 air changes per hour.
  • CLASS 1,000 typically 75 to 120 air changes per hour.
  • CLASS 100 typically 250 to 350 air changes per hour.
  • CLASS 100,000 typically 400 to 600 air changes per hour.

FILTER CALCULATION BASED ON CLASS AND AIR CHANGE RATE
FILTERS REQUIRED = AREA X CEILING HEIGHT X ACH/ 650 CFM*

* Note average filter cfm output can vary between 600 cfm to 750 cfm depending on filter manufacturer and the external pressure drop the filter is seeing.


Mobile Laboratories - Primary Features:

Self-powered and propelled laboratories and cleanrooms.

Ideal for field applications, PETI's self-propelled mobile laboratories and cleanrooms are built into an existing vehicle chassis capable of transporting sensitive research and personnel virtually anywhere, while maintaining an environment conducive to research or field applications.

    Standard sizes and features:
  • 12 ft Van-type mobile lab
  • 20 ft Bus (self-powered) or Trailer (towed) type
  • 30 ft Bus or Trailer type
  • 40 ft Trailer type
  • 45 ft Trailer type
  • 53 ft Trailer type (typical semi-truck trailer)

    • Any of the above types can be retrofitted to provide and maintain up to a class 100 clean environment.

Have questions or concerns? Need to equip a specific or special vehicle? Feel free to contact us or request a quote today.


Mobile Laboratories - Product Options:

Mobile Laboratories - Technical Data:

    CLASS VERSUS HOURLY AIR CHANGE RATES (ACH)
  • CLASS 100,000 typically 25 to 35 air changes per hour.
  • CLASS 10,000 typically 45 to 60 air changes per hour.
  • CLASS 1,000 typically 75 to 120 air changes per hour.
  • CLASS 100 typically 250 to 350 air changes per hour.
  • CLASS 100,000 typically 400 to 600 air changes per hour.

FILTER CALCULATION BASED ON CLASS AND AIR CHANGE RATE
FILTERS REQUIRED = AREA X CEILING HEIGHT X ACH/ 650 CFM*

* Note average filter cfm output can vary between 600 cfm to 750 cfm depending on filter manufacturer and the external pressure drop the filter is seeing.

Frequently Asked Questions:

Q: What can I have installed in my trailer?
A: P.E.T.I. has the ability to install most customer requirements into a trailer limited only by the trailer space and capacity requirements of the equipment required. P.E.T.I. engineers can assist you with whats feasible to install in one trailer or if a second or larger trailer maybe required. For a list of options please go to LINK our options page. If you don’t see something you need please ask.

Q: What is a typical delivery time?
A: After layout approval drawings (ususally 2weeks), design and engineering may take up to 4 weeks. Add to that your review and approval time and we are probably 8 weeks before we start fabricating (it can be sooner depending on the complexity of the trailer) Typical fabrication miight be 4 to 6 weeks. So overall you are looking at 12 to 16 weeks after receipt of an order.

Q: Can I (the customer) furnish lab equipment for you to install?
A: Yes, we can install equipment that you have drop shipped to our mfg facilities. We would have to have submittals with complete details.

Q: What licenses will the trailer require?
A: This varies from state to state. Additional temporary licenses may apply in transited states. If the mobile cleanroom is transportable (meaning shipped on a flat bed trailer) the transit licenses would be the responsibility of the of contract carrier. The container itself may not require a license. P.E.T.I. will perform a license requirement search after getting under contract.

Q: What taxes will be required?
A: You may be responsible for sales or use taxes in your state. If the cleanroom is motorized or trailerable there will most likely be state and federal excise taxes due along with license fees.

Q: What is the typical cost of a mobile cleanroom?
A: P.E.T.I. has developed a base price with standard features for various configurations. We then add to that base price the options that you have selected. The option prices include the materials, installation, additional engineering, and drawings. Some options may require other options such as electrical power, DI water etc. For a budgetary price please contact our sales department. We will respond with an e-mail quote to bona fide companies. We apologize but we cannot send quotes to personal email accounts (e.g., gmail, hotmail, yahoo!, etc.). We must be able to determine your company's domain name based on your email address. (ex: example@peticleanair.com corresponds to www.peticleanair.com)